Sound-X NPIPB-110 Manual De Uso página 7

Operation
- Press the STANDBY/ON button of the unit once to turn on the system.
Adjusting the volume
To adjust the volume on the unit:
Press the VOLUME +/- until the desired volume is reached. The volume level will be shown
on the display.
REAL TIME / ALARM TIME SETTING
Pressing the SET button at any time will allow you to enter the alarm and clock setting menu.
SETTING THE CLOCK
a) Press the SET button 5 times until all of the digits for the main clock are flashing.
b) Press the "SKIP
to increase the hour. (A PM indicator appears when time is set to PM, there is no AM
indicator).
Press the "VOL - " button to decrease the minute or press the "VOL +" button to increase
the minute.
Press and hold the SKIP
to scroll through the numbers quickly.
c) Press the SET button once to confirm and exit the time setting menu.
NOTE: If there are no key operations for 5 seconds, the unit will automctically exit the menu
and save changes.
ALARM TIME SETTING
a) Press the SET button 1 time to set alarm 1, 2 times to set Alarm 1 volume level, 3 times
to set Alarm 2, or 4 times to set Alarm 2 volume level. The relative ALARM icon will turn
on and all of the clock digits will flash when you have reached the appropriate Alarm set
menu.
When Alarm off is selected,"OFF" will show on the LCD and the alarm time cannot be
adjusted.
b) Press the FUNCTION button (when in the appropriate Alarm set menu and digits are
flashing) to select the alarm source as follows:
Alarm Off Alarm to iPod
c) Press the "SKIP
to increase the hour. (PM indicator appears when time is set to PM, there is no AM
indicator).
Press the "VOL -" button to decrease the minute or press the "VOL +" button to increase
the minute.
Press and hold SKIP
srcoll through the numbers quickly.
d) In alarm volume setting mode, the alarm icon will be ON and the volume level will show
on the LCD with flashing. Use VOLUME +/VOLUME – button to select alarm volume
level (1 ~ 15), default is VOL10. So, when alram is activated, Alarm Buzzer/Radio/iPod
will on with alarm volume level.
e) When setting Alarm 1, Press the SET button 5 times to confirm and exit. When setting
Alarm 2, Press the SET button 3 times to confirm and exit.
NOTE: If there are no key operations for 5 seconds, the unit will automatically exit the menu
and save changes. When the alarm is in iPod mode, if the iPod is not docked the buzzer will
sound instead of the iPod.
IPB0 Eng B.indd 6
All manuals and user guides at all-guides.com
" button to decrease the hour or press the "SKIP
/ SKIP or VOL- / VOL+ button for more than 1 second
Alarm to FM
" button to decrease the hour or press the "SKIP
/ SKIP or VOL- / VOL+ button for more than 1 second to
GB - 6
Alarm to AM Alarm to Buzz
" button
" button
00//6 :34:44 PM