Common Setup - Aethra VX2000 Guida Rapida

All manuals and user guides at all-guides.com
Quick Guide
Select the ACT AS field.
4
GB
Select the instrument mode, e.g. DTE.
5
The lower section of the screen shows the selected
network configuration. The yellow LED that corresponds to
the selected mode goes on.. It's possible to choose
between DTE and DCE
Select MANUAL TESTS.
6
Select the test UNFRAMED BER.
7
In order to connect to the line, use the appropriate cable
according to the selected mode. In case of DCE mode, an
appropriate cable, to order separately, is needed.

1.2 Common Setup

This page is used to setup the common parameters for the various tests.
To select the COMMON SETUP page
1
8
VX2000