Technical Assistance - S&P COMET-P Manual De Instrucciones

INSTRUCTIONS FOR USE (FIGURE 1)
• Drying hair: Lift the transparent cover (3) and turn the main ON-OFF switch (5) to ON.
Take the dryer and press the operation button (7). Users can control the drying speed and
temperature using the drying speed and temperature selector (8).
• Using the shaver socket: Lift the transparent cover (3) and turn the main ON-OFF switch
(5) to ON. The indicator light (4) will light up and the shaver socket will be ready for use.
Ensure the power requirements of the shaver are less than 20W. After use, switch
the main switch (5) to the OFF position and close the transparent cover (3).
MAINTENANCE
• Before carrying out any maintenance task, ensure that the appliance is fully disconnected
from the power supply.
• Clean the surface of the appliance using a damp cloth, ensuring that the air intake grille is
completely free of dust.
• Do not use detergents or abrasive products.
DECOMMISSIONING / RECYCLING
EEC directives, and the commitment we have to future generations, bestow a
responsibility to recycle materials; all waste from packaging should be placed in
the corresponding recycle bins, and all appliances replaced should be taken to the
nearest Waste Services Centre.

TECHNICAL ASSISTANCE

The extensive Network of Approved S&P Dealers guarantees the appropriate technical
assistance. If some anomaly in the operation of the appliance is detected, please contact any
of the aforementioned dealers, who will assist you as necessary.
Any manipulation that is not strictly required for the installation of the appliance or performed
by non Approved S&P Dealers will render the guarantee null and void.
To clarify any query you may have concerning S&P products, contact the After Sales Service
Network if you are based in Spain, or your normal distributor if you are located elsewhere. To
locate your nearest dealer, please visit: www.solerpalau.com
8