Picture Adjustment - Hyundai HLT-1711 Manual Del Usuario

2
2

Picture adjustment

You can adjust picture contrast, brightness, horizontal/vertical position, clock, clock phase, auto-configure and reset as
you prefer.
1. Repeatedly press the INPUT SELECT button to select the PC monitor mode.
2. Press the MENU button to select the Picture menu.
3. Press the
4. Press the
To see a normal picture, match the resolution of RGB mode and selection of Wxga(1280x768) mode.
5. Press the OK button to store it for the PC monitor picture.
6. Press the MENU button to return to PC mode.
30 30
All manuals and user guides at all-guides.com
button to select the desired picture item.
D D / E E
F F / G G button to make appropriate adjustments.
H-Position / V-Position
This function is to adjust picture to left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen
size will also change.
Clock Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Auto-configure
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will
disappear for a few seconds while the Auto-configuration is in progress.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust
your monitorÕs position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
Wxga
The display Stored appears.
Input PC
Contrast 80
Brightness 60
H-Position 0
V-Position 0
Clock 40
Clock phase 13
OO
Auto-configure
Reset
Wxga on0
()O}{OOKOMENU OEXIT