Wiring Diagram - Diehl HYDRUS Instrucciones De Montaje

Deutsch
English
Pulse outputs (open drain)
Input voltage
Input current
Voltage drop at the active output
Current through inactive output
Reverse current
Pulse duration, pulse break, pulse
frequency

Wiring diagram

VCC = 24 V
Pull-up
Pulse 1
Pulse 2
HYDRUS 2
brown
The pulse outputs are open-drain circuits.
The drain branch has a resistance of just 0 ohm, i.e. there is no internal
current limiting. If required, this must be provided by an external protec-
tive resistance (*if not available on site).
The internal resistance of the switching device must be 5x of the protec-
tive resistance.
Français Español
max. 30 V
max. 27 mA
max. 2 V / 27 mA
max. 5 μA / 30 V
max. 27 mA
depending on device configuration
(detailed description on request)
pulse
R
sps
ground
Português
HYDRUS
= 5k6
-9-