XtremeMac TANGO Manual Del Usuario página 7

Button Function
All manuals and user guides at all-guides.com
Power On
Power Off
TANGO™ User Manual
Press Once:
Previous/Next track
Hold:
Scan track
Adjusts volume
Adjusts bass/treble
Play/Pause
Reset bass/treble settings Red light blinks once
Charging
Charging, Powering and Sleeping
Tango automatically charges your iPod during operation.
When Tango is On:
• If your iPod is playing audio when docked, Tango will automatically
Connecting Tango to other devices
begin playing the current track
• If your iPod is not playing audio when docked, Tango will not play
Tango's back panel ports give you extra options for your iPod's audio and
anything until you hit play on either the iPod or the remote
• Tango will go into "sleep" mode when paused for more than one
video content.
minute, or when it does not sense audio from the iPod or the auxiliary
input for more than one minute
Line In 3.5mm mini-jack: Lets another device (like a computer or home
• Tango will charge your iPod (4G models and later) while it is docked
stereo) use Tango as an external speaker system.
When Tango is Off:
A/V Out
Composite Audio/Video Jack: Lets you send audio and
• Tango will not play audio until powered on
video signals to another device like a TV or home
• If you dock your iPod while it is turned off, it will wake up your iPod
entertainment system.
momentarily and then turn off and go into charge mode
S-Video This video connection lets you send a high quality video
signal to a TV or monitor.
When Tango is in Sleep Mode:
• The red light glows solid to show that Tango is
in sleep mode
• Tango will wake up when you press play on
Watching iPod Video On An External TV/Monitor
your iPod, or when it senses audio from the
auxiliary input
To view video content on a TV while your iPod is docked in Tango, follow
theses simple steps.
1. Plug in a composite audio/video cable (like XtremeMac's HomeShow)
into either the A/V Out jack, or an S-Video cable into the S-Video Jack.
2. Attach the other end to the corresponding jack on the TV/VCR/DVD
player.
3. On your iPod, select: Videos > Video Settings > TV Out. Push center
button until selection says "On."
4. Select video content on iPod to watch with Click Wheel. Press play.
Menus, playlist selection, and iPod settings are only accessible
with the Click Wheel.
Indicator Display
Blue light glows
Red light appears briefly
(Tango ramps volume down
when turned off and back up
 I English
to the same level when turned
back on)
Blue light blinks
Blue light blinks
Blue light blinks
Red light appears when you
reach maximum and minimum
levels
Blue light blinks
Red light appears when you
reach maximum and minimum
levels
Red light glows while paused
Blue light glows when play
resumes