Operation - AmazonBasics B0853PBGCD Instrucciones

EN

6. Operation

A
B
C
D
A
Before using the solar security light, the
solar panel needs to be connected to the
light for three days� The initial charge should
be done in the OFF position�
After this, there will be enough battery
power to operate the light� Place the light in
AUTO mode�
Push the switch to "ON" to turn on normal
ON mode� This will allow a limited period of
constant illumination�
6
All manuals and user guides at all-guides.com
B
Two different control switches adjust the
light's illumination time and range of motion
detection�
TIME: Determines the duration of the light
once motion is detected:
30S: 30 seconds
60S: 60 seconds
120S: 120 seconds
TEST: allows positioning of the light's motion
sensor to be tested at day or night�
Once the motion sensor is in the desired
position, attempt to trigger the light by moving
in the intended detection zone� If the light
illuminates, the motion sensor is positioned
correctly� You are now ready to move the
switch to the preferred duration option� The
light will now only turn on in darkness�
SENSITIVITY: Controls the distance of the
range of motion detection:
L: low
M: medium
H: high