Code Identification - AmerTac ZH101 Manual Del Propietário

Code Search
If you cannot find a 4-digit code in the Code Table that
operates your TV, try searching for the code as follows:
1. Manually turn on the TV to be controlled.
2. Press and hold the Power and Mute buttons until the
red indicator remains on.
3. Release the buttons.
4. Press the Power button to begin code search.
5. Press the Channel Up (CH+) button (or Power
button) repeatedly until the TV changes channel (or
turns off). You might have to press the button 200
times or more to find your code. If you accidentally
overshoot the code required, press the Channel Down
(CH-) button, to backtrack through the code library
until the TV changes channel.
6. Press and release Mute to save the code. Code search
is now complete. Write down your code in the box in
the previous page.
Note: Code search starts from the currently stored 4-
digit number.

Code Identification

To determine the code installed in the remote:
1. Press and hold Power and Mute at the same time
until the red indicator remains on.
2. Release the Power & Mute buttons.
3. Press and hold the Power & Mute buttons until the
Visible indicator blinks and remains on.
4. Release the Power & Mute buttons.
5. To find the first digit of the four-digit code, press
and release CH- and count the number of indicator
blinks. Note: No blink indicates a "0" digit. To find
the second digit, press and release the V- and count
the number of indicator blinks. To find the third digit,
press and release the CH+ and count the number of
indicator blinks. To find the fourth digit, press and re-
lease the V+ key. This time, the indicator will remain
off once the fourth digit blinks are completed.
6. Code Identification is now complete and remote
operation returns to normal.
3