Scope Of Delivery; Intended Use; Technical Description; Function Description - Waeco PerfectView GPS300 Instrucciones De Montaje Y D’uso

_GPS300.book Seite 16 Freitag, 17. Juli 2009 5:07 17

Scope of delivery

Observe the following installation instructions:
Secure the GPS speed switch in such a way that it cannot become loose under any
circumstances (sudden braking, accidents) and cause injuries to the occupants of
the vehicle.
Do not attach the GPS speed switch in the airbag deployment path, as this could cause
injury if the airbag is triggered.
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp (fig. 1 1,
page 3) or a voltmeter (fig. 1 2, page 3).
Test lamps with bulbs (fig. 1 3, page 3) consume excessive current and can damage
the vehicle's electronic system.
When making electrical connections (fig. 3, page 3), ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection
Insulate all connections.
Protect the cables from mechanical wear (for example rubbing against existing cables)
using cable binders or insulating tape.
Observe the following instructions when handling the GPS speed switch:
Do not open the device.
Never submerge the device in water; it is not watertight.
Do not operate the device if the housing has been damaged.
Connect it to the correct voltage.
3 Scope of delivery
GPS speed switch with connecting cable
Branch connectors (5 pcs)
Velcro strips (2 pcs)
Operating manual
4

Intended use

The GPS300 GPS speed switch (item no. 9102200010) is a device which is designed for
use in vehicle. It can be used to control a camera (e. g. a video system).
5

Technical description

5.1

Function description

The GPS300 GPS speed switch is a device which can automatically switch a front or rear
video system on and off. It can be fastened to the dashboard.
16
PerfectView GPS300