Uline H-3009DLX Manual Del Usuario página 2

1. Lay bench top on a smooth, non-marring surface.
Place side with rectangular indents and pre-drilled
holes facing up. (See Figure 3)
Figure 3
4 Pre-Drilled Holes
2. Set one of the assembled pedestals onto the bench
top, aligning the mounting plate with the recessed
rectangular indent and pre-drilled holes. (See Figure 4)
PAGE 2 OF 6
ATTACHING PEDESTALS TO BENCH TOP
Rectangular
Indents
1-800-295-5510
3. Secure pedestal to bench top using four wood
screws and Phillips screwdriver. (See Figure 4)
Figure 4
4. Repeat steps 2 and 3 to attach the second pedestal.
5. Carefully turn assembled locker bench over into the
upright position.
uline.com
0920 IH-3009DLX