Kunft KSI450 Manual De Instrucciones página 10

7. If, when ironing clothes, you need to spray some water on the
clothes for easy ironing, you can press the Spraying button, and
some water will come out from the spraying nozzle
8. If no steam goes out, it means there is no water in the water tank,
and you must immediately release the steam button. To fill up the
water tank, first unplug the appliance. Plug it back in after refilling
the water tank and you can now use steam.
9. after ironing is complete, turn the temperature regulation knob to
the "0" position, and unplug the appliance. Then pour the water out
and turn the temperature regulation knob to the "maX" position.
Plug the appliance back in and press the steam button until no
more steam comes out (see step 8). This method ensures no
water remains in the boiloff box, and damages the steam function.
function
Sterilization function:
use more than one spurt of 100°c high temperature steam to kill all
kinds of germs. It can be used in your kitchen, on toys, mattresses,
sofas, etc. Removes bad smells.
convenience:
• Very easy to use without having to hang it over your clothes.
• High speed steam spurting
• Powerful steam jet
• Quickly heats up, you can iron clothes within a minute.
avoiding accidents
Part to inspect
Failure
no steam
little steam
Does not heat up
Burnt or
shrunk fabric
Water drips from
the steam nozzle
Ferro-Vapor-KSI450-Manual-3.indd 10
Temperature
Water regulation
tank knob
●
●
●
●
The The
water temperature
tank is regulation
empty. knob must
be in the
correct
position, and
an appropriate
temperature
selected,
10
Steam Power
nozzle supply
● ●
● ●
●
Descale check the
the indicator light
nozzle is functional,
and the if the appliance
iron. is correctly
plugged into
a socket, and
if there is
power in the
socket.
Heating
body
power
●
●
check the
indicator
light is on.
18/01/12 12:55