Mechanical Features - Urmet 1071 Manual Del Usuario

For the 1071/13 module:
Resistive loads
16 A
3680 W
— Four local buttons are available on all relay modules for direct output activation, useful during system
testing and/or configuration
— Refer to the instruction booklets of each module for more information.
LoGiCAL FEATurES
— No programming needed. In all cases, the kit can be reconfigured as required using IPerSet software
via USB (use of a 1071/56 is required).
— Six logical addresses of the available 254 are used:
• 1 and 2 for the 2 eight-input modules for 1071/18 buttons
• 30 for the 1 seven-input on DIN rail module 1071/7
• 50 and 51 for the two four-output 16 A through modules 1071/14
• 80 for the four-output 16 A relay module 1071/13
— Only three of the possible 40 actions are used for each output point. In particular, three actions are
used: toggle, on, off.

MECHAniCAL FEATurES

— Refer to the specific instruction booklets for the mechanical features of each module in the kit.
— Reference standards:
DS1071-09
Controllable loads, 220-240 V~ (distributed on each relay)
Incandescent
lamps
10 A
2300 W
EN 50090-2-2
EN 50428
EN 60669-2-1
EN 60669-1
Fluorescent and
energy-saving
lamps
4 AX
920W
Electronic Ferromagnetic
transformers
4 A
920W
transformers
4A
920 VA
13