BOCCHI 1007 Serie Instrucciones De Instalación página 4

Counter Installations
1. Unpack the sink and inspect for defects. If you have any questions, contact BOCCHI immediately toll-free at
877-565-2221 or email BOCCHI directly at info@bocchiusa.com
NOTE: There are 2 types of Counter Installations.
A. Vessel installations where the entire sink sets above the counter. This applies to models: 1074-XXX-
0126, 1115-XXX-0125, 1122-XXX-012X, 1123-XXX-012X, 1124-XXX-012X, 1376-XXX-012X, 1377-XXX-012X,
1378-XXX-012X, 1393-XXX-0132, 1394-XXX-012X, 1418-XXX-0126, 1419-XXX-0126, 1479-XXX-0126, 1489-
XXX-0126, 1490-XXX-0126
B. Semi-recessed OR drop-in installations where a portion of the sink sits below the counter. This applies
to models: 1076-XXX-012X, 1077-XXX-012X, 1078-XXX-012X, 1079-XXX-012X, 1105-XXX-012X, 1111-XXX-
012X, 1113-XXX-012X, 1161-XXX-012X, 1305-XXX-012X, 1365-XXX-012X
2. Locate the model number of your sink. Follow the appropriate installation method for your model.
3. Find the matching dimensions of your sink on the spec drawing. If you do
not have a printed copy of your spec drawing, copies can be found online
at www.BOCCHIUSA.com
4. Transfer the dimensions to your countertop using your sink as a template. The "X" and "Y" distance will
be a fixed measurement based on your sink model. However, the position of the sink on the counter will
vary on how far out from the wall you prefer-- be sure to consider the drain and faucet placement when
determining the final sink position.
NOTE: Some model numbers may be fully dropped-in, semi-recessed or set fully on top as a vessel based on
your personal preference. Determine your preferred setting prior to marking and cutting.
4
www.BOCCHIUSA.com