Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching to seat post
A. Assemble the attachment to the seat post. Be sure to tighten firmly
B. Connect shopping trailer
1. Open the D-pin
(D-Clip)
on the draw bar
2. Insert the extension arm into the draw bar
Secure the connection between the two arms with the D-pin
(D-Clip)
as shown below. Make sure that the pin is in the closed
position and that the draw bar is firmly attached to the extension
arm.
3. Attach the adapter
(1)
to the extension arm as shown below.
D Clip
draw bar
C. Then attach the adapter to the hitch ball
(2)
1 - Loosen the pin
(3)
2 - Lift the locking hook
(4)
and position the adapter
3 - Close the locking hook (4), tighten the pin
hook
(4)
cannot be raised.
Warning! Be sure to check that the locking hook
ball and cannot be raised. Warning! Make sure that the safety strap is securely
fastened.
Adaptater (1)
Extension arm
(2)
following the steps below :
(1)
(3)
(4)
(1)
on the hitch ball
(3)
firmly so that the locking
(4)
is properly closed on the hitch
(2)
Publicidad
