Maintenance And Care; Disposal Information; Exemption From Liability - Flex WB 110-260 Instrucciones De Funcionamiento Originales

Maintenance and care

To reduce the risk of injury, periodically check
that all fasteners are attached and adjusted
according to the assembly instructions
included in this manual.
Cleaning
■ Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust,
oil, grease, etc
■ Do not at any time let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. come in contact with
plastic parts. Chemicals can damage,
weaken or destroy plastic which may result
in serious personal injury.
Repairs
■ Have your Miter Saw Stand serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.

Disposal information

Raw material recovery instead of
waste disposal.
The saw stand, accessories and packaging
should be recycled in an environmentally
friendly manner. Plastic parts are identified for
recyding according to material type.
NOTE
Please ask your dealer about disposal
options!

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused by
the product or by an unusable product. The
manufacturer and his representative are not
liable for any damage which was caused
by improper use of the product or by use
of the product with products from other
manufacturers.
18
WB 110-260