Hardware Installation - BTC 2001BRF Guía De Instalación Rápida

All manuals and user guides at all-guides.com
Wireless Keyboard & Mouse Kit

Hardware Installation

1. Connect the receiver to your PC by plugging in
the receiver's USB plug into your PC.
2. Take the keyboard and make sure the batteries
on the back are installed correctly. (Follow the
polarity signs in the battery compartment.)
3. Take the mouse and make sure the batteries on
the back are installed correctly. (Follow the
polarity signs in the battery compartment.)
ID Setting
This ID-recognition function helps to protect against
interference from other RF keyboards in the same
environment. Remember to set the ID when you
replace the batteries or your key board kits do not
work properly.
The word CONNECT labels the ID button on each
unit.
The LED under ID button of receiver shows
connecting condition.
1. Your PC must be on to change the ID setting.
2. Press ID button on the side of the receiver once.
3. Press ID button on the bottom of the mouse
once.
4. Press ID button on the bottom of the keyboard
once.
Important:
1. Use the mouse only on a clean, flat, non-slippery surface in order to ensure smooth and
accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one.
Software Installation
Keyboard Driver Installation
In order to take advantage of the special button functionality of the keyboard you will have
to install the keyboard driver which is located on the driver disk included in the box.
1. Insert the disk labeled "KeyMaestro Input Device Driver" into your disk drive.
2. Open File Explorer to find "SetupKey.exe" from the disk. Double-click the "SetupKey.exe".
3. Then follow the screen instruction to install the driver. The default-installed path is set to
c:\Program Files\KMaestro. You have the option to change the install path during setup.
4. When all setup procedures are finished, the operating system does not need to restart. The
driver is loaded when you see the driver icon show on the taskbar.
Quick Installation Guide
Front View of Receiver Plug Back View of Receiver Plug
ID Button
ID Button
1.5V 2pcs
2001URF
ID Button
ID Button
ID Button of Receiver
ID Button
1.5V 2pcs
ID Button of Keyboard
2001BRF/URF QIG 英
3100505090 v1.2
2001BRF
ID Button of
Mouse