TMEZON MZ-IP-V103W Instrucciones De Operación página 7

Note on lock connection
The electric locks are usually divided into NC lock and NO lock, their wiring is different,
the NC lock need to work with the additional power supply control.
Note:
1.The doorbell or the monitor will not provide the power to door lock.
2.The doorbell can support door locks within 30V.
3.Door lock's power supply depends on its door lock, if the door lock is 12V,
the corresponding power supply is 12V, etc.
4. Make sure the input voltage from the monitor to the doorbell must reach 11.7V
when unlocking.
NO Lock: Always closed when power or power off, only open when press unlock.
NC Lock: Always open when power off. Closed when power and open after press unlock.
NO lock
Electronic lock
NC lock
Electric mortise lock
1 2 3
4 5 6
7 8 9
* 0 #
Magnetic lock
Access controller
Electric strike lock
Power supply control
DOOR
Doorbell
EXIT
Monitor
1
EXIT 2
4 pin cable
GB-11
How to connect Network
Note:
1). Router Band--This IP indoor monitor will only connect to the 2.4GHZ band.
2). Router b/g/n --This IP indoor monitor works on 802(b/g/n) network.
Please download an app "TuyaSmart" via "Google Play Store"
or via "APP Store", then register an account.
APP connection
Step 1. Connect the IP indoor monitor to a WiFi router through an Ethernet cable or WIFI.
If through wireless/WiFi connection, please refer to the following method.
Slide finger in any direction or single-click the
right-hand mouse button to bring up the tool
bar menu, then touch/click "
Touch/click "Advanced", enable "WIFI". Then
touch/click "Wifi" to enter.
Basic
Monitoring
Talk
Unlock
Hang up
Available wireless devices will be shown on
the list. Choose one and touch/click it.
TP-LINK_169CE6 57/100
dlink 57/100
TL-WR941N 42/100
Select registration region.
Email is your available email account.
Password requires at least 6~20 characters
with a mix of letters and numbers.
For example: Tmezon123
Touch/click "Network" to the next.
".
jpg
Touch/click "
Network
Port Advanced
DDNS
Wifi
Mobile phone
Sub stream
IP firewall
1/1
Fill in the correct password of the wireless
router and confirm. The device will reboot
automatically and it will connect to the router.
Wifi
GB-12
Configuration
System Door Network
Scheduling Alarm Maintenance
User Default Information
".
Wifi
dlink
Password
123456789