Altec Lansing inMotion IMV 712 Guia Del Usuario página 4

• Connect one end of the RCA cable to the three RCA
input jacks located on the back of the inMotion
iMV712, and the other end to the three RCA output
jacks located on the back of the alternate audio and
video source.
• Connect the DC power supply to the rear of the
inMotion iMV712, then insert the power supply into
a wall outlet.
• Turn on the inMotion iMV712 by pushing the on/off
switch located at the rear of the unit. The LCD screen
will turn on.
• Push the "SOURCE" button repeatedly until "AV"
appears on the LCD screen.
• Turn on alternate audio and video source.
• Set the volume on the alternate audio and video
source at mid-level.
• Set the volume on the inMotion iMV712 at minimum
level and adjust upward to a comfortable listening
level.
Connect the Pod video or
I
on a separate TV set (S-Video)
The inMotion iMV712 includes a pass-through video
feature that allows you to display videos and photos
from your iPod onto a separate television set. To
connect the inMotion iMV712 to a separate television
set or VCR, follow the steps below:
• Make sure the power to your television set or VCR is
turned off.
• Locate an S-Video cable (sold separately).
• Connect one end of the S-Video cable to the S-Video
port on the back of the inMotion iMV712 and the
other end to the S-Video input on your television set
or VCR.
• Connect the DC power supply to the rear of the
inMotion iMV712, then insert the power supply into
a wall outlet.
• Turn on the inMotion iMV712 by pushing the on/off
switch located at the rear of the unit. The LCD screen
will turn on.
• Turn on the television set or VCR.
Note: Only the video will play through the VCR. Enjoy
the sound using the inMotion iMV712 speakers.
Placing the system in standby mode
To place the inMotion iMV712 in standby mode, press
the standby button on the remote control. Press this
button again to take the system off the standby mode.
All manuals and user guides at all-guides.com
Pod photo
I
4
Muting the System
To mute the inMotion iMV712, press the "MUTE"
button on the remote control once. The mute icon will
be displayed on the LCD screen. Press this button again
to restore the sound.
Navigating Menu options with the remote
The inMotion iMV712's menu options allow you to
control picture, function, and system settings using the
remote control and the set-up menu on the LCD screen.
• Pause the iPod.
• Press the "MENU" button on the remote for three
seconds to display the set-up menu on the inMotion
iMV712 LCD screen.
• Press the "MENU" button again to navigate through
the menus for picture ("PICTURE"), function
("FUNCTION") and system ("SYSTEM").
Picture ("PICTURE") Menu – for brightness, contrast,
and color controls
• Press the "MENU" button located on the remote
control for three seconds to enter the set-up menu on
the LCD screen.
• Use the up and down arrows to select the brightness
("BRIGHTNESS"), contrast ("CONTRAST"), and color
("COLOR") of the LCD screen to suit your preferences.
The default setting is 50.
• Use the left and right arrows to make adjustments to
the selected setting.
• To reset the picture menu to the manufacturer's
default settings, select the "RESET" option and push
the left or right arrow.
Function ("FUNCTION") Menu – for screen orientation
and screen aspect ratio selections
• Press the "MENU" button located on the remote
control for three seconds to enter the set-up menu on
the LCD screen.
• Press the "MENU" button again to select the function
("FUNCTION") menu.
• Use the up and down arrows to select the screen
orientation ("NORMAL") or screen aspect ratio
("ZOOM"). The screen orientation ("NORMAL") flips
the screen upside down ("DOWN") or back to right
side up ("NORMAL"). The screen aspect ratio
("ZOOM") allows you to adjust the screen aspect ratio
of your video source – 4:3 (standard TV) or 16:9
(widescreen).
• Use the left and right arrows to adjust the selected
setting.