Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use ProjectPro
TM
Nozzle System
The quick-connect
on the nozzle extension allows you
to switch between four different ProjectPro
TM
system
nozzles. The ProjectPro
TM
nozzles vary the pressure
and spray pattern as shown.
Low
Pressure
Black
Use to apply
detergent
High Pressure
i
\
J
Delicate
General
Max
40 ° Yellow
15 ° Orange
0 ° Red
2350 PSI
2800 PSI
2900 PSI
2.7 GPM
2.5 GPM
2.3 GPM
Foi!ow these instructions to change ProjectPro
TM
no711es:
1.
Engage trigger lock on spray gun.
l
cAuTmO.
1
For general rinsing (medium pressure and
medium flow), ideal for most all purpose cleaning
such as home siding, brick patios, wood decks,
driveways and sidewalks, garage floors, etc.,
select orange general ProjectPro
TM
nozzle.
For maximum rinsing (higher pressure and
lower flow), for stubborn or hard to reach
surface such as second story surfaces, paint
removal oil stains, rust removal or other
stubborn substances (tar, gum, grease, wax,
etc.), select red max ProjectPro
TM
nozzle.
° NEVER exchange ProjectPro
TM
nozzles without locking the
trigger lock on the trigger.
• DO NOT twist ProiectPro
TM
nozzles while spraying.
2.
Pull back collar on quick-connect
and pull current
ProjectPro
TM
nozzle off. Store ProjectPro
TM
nozzles
in holder
provided
on the accessory
tray.
3.
Select
desired
ProjectPro
TM
nozzle:
•
For delicate
rinse (lower
pressure
and higher
flow), for gentle
cleaning
of cars/trucks,
boats,
RV's, patio furniture,
lawn equipment,
etc.,
select yellow
delicate
ProjectPro
TM
nozzle.
To apply detergent, applies project specific
cleaners to help break down stubborn dirt and
grime on a variety of surfaces, select black
ProjectPro
TM
cleaning detergent nozzle.
4.
Pull back on collar, insert selected ProjectPro
TM
nozzle and release collar. Tug on ProjectPro
TM
nozzle to make sure it is securely in place.
5.
For most effective cleaning, keep ProjectPro
TM
nozzle from 8 to 24 inches away from cleaning
surface, if you get the nozzle too close, you may
damage the cleaning surface.
6.
DO NOT get closer than 6 inches when cleaning tires.
11
Publicidad
Tabla de contenido
