Pike & Main P0078-1 Instrucciones De Ensamblaje página 4

STEP 2
Installing the legs
• Using two people, place the cabinet (A) on a smooth, clean surface with the
bottom facing up.
• Insert leg (B or C) into the coordinating location on cabinet (A). Ensure the
notch for the shelf is facing inward towards the center of the cabinet.
• Loosely attach the leg (B or C) using bolt (aa), lock washer (bb), flat washer
(cc) and Allen wrench (dd). Two bolts per leg are necessary. Do not tighten
bolts all the way. They must be loose to fit the shelf.
• Repeat the procedure above for the three remaining legs (B or C).
B C
A
cc
bb
aa
dd
C
P78. 0000 / 00 / 00 SU
B
4
B
A
C