Getting Started; Temperature Control - Vaporfi ORBIT Manual Del Usuario

GETTING STARTED

1. Snap and remove the mouthpiece from the Orbit
2. Insert ground dry herbs into the center heating chamber of the vaporizer. (Make sure not
to overfill and do not pack too tightly as this will restrict the airflow and produce negative
results)
3. Push and connect the mouthpiece back onto the vaporizer.
4. Quickly press down and release on the power button 5 times within 2 seconds to turn on the
vaporizer.
5. The heating chamber will begin to heat and the herbs will begin to vaporize shortly
thereafter. To adjust the heating temperature, press and hold the power button for 3-5
seconds while switching between temperatures:

TEMPERATURE CONTROL

LOWEST HEAT – WAIT 60 SECONDS AFTER THE DEVICE HAS TURNED ON BEFORE USE.
When the small indicator light illuminates red, this indicates the temperature is at 360F.
All manuals and user guides at all-guides.com
03