Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
•
Soil meter
•
Manual and registration card
Operation
1. Set your desired soil testing mode on the
mode selector. The three modes are:
Moisture,
Light and
Fig. 1
2. Insert the probe tips into the soil you wish
to measure (Fig. 2).
Fig. 2
m
CAUTION!
Do not force the probes into
hard soil or at hard objects, as this can easily
damage the probes.
3. Take your measurements according to the
white indicator on the gauge (Fig. 3).
soil pH (Fig. 1).
Probe tips
Fig. 3
NOTE: Do not cover the light sensor.
NOTE: Water may not penetrate the soil evenly,
try measuring at different locations and depths
to get an accurate reading.
NOTE: Water before testing. If the soil is too dry
the indicator will not move.
4. Remove the probes from the soil and wipe
them clean after each use.
m
CAUTION!
in the soil for too long.
Service + Support
If your Sun Joe
SJ-MMPH1 3-in-1 Soil Meter
®
requires service or maintenance, please call
Snow Joe
+ Sun Joe
®
at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you will need
to provide the model and serial numbers, which
can be found on the registration card. Copy
these numbers into the space provided below.
Record the following numbers from the registration card
of your new product:
S J
- M M P H 1
3
Do not leave your soil meter
customer service
®
Model #:
Serial #:
Publicidad
Tabla de contenido
