Vaporfi VOX II Manual Del Usuario página 7

INSTALLING BATTERY
1.
Unscrew and remove the top cap of the VOX II by turning the top counterclockwise.
2.
Insert the battery into the VOX II with the positive side first.
3.
Screw the top back on by turning it clockwise until secure (make sure not to over tighten).
NOTE: If your battery rattles, this may indicate that your VOX battery is not making contact with the battery
pin. Unscrew the battery pin (copper piece located in the battery cap) by unscrewing the pin 2 turns
clockwise. Screw the battery cap back onto the VOX II and ensure the battery is no longer
rattling. Adjust battery pin accordingly.
TURNING DEVICE ON
Press the power button 5 times continuously to turn the device on. VaporFi will
flash on the screen indicating that the device is on.
TURN DEVICE OFF
Press the power button 5 times continuously to turn the device off.
NOTE: To lock/unlock your VOX II press and hold the wattage up and down buttons at
the same time.
All manuals and user guides at all-guides.com