SNOWJOE AUTOJOE ATJ-AIR1-HYB Manual Del Usuario página 7

3. Place the air chuck onto the threaded valve
stem (Schrader), then press down on the air
chuck clamp to secure the chuck onto the
valve (Fig. 9).
Fig. 9
Air chuck
clamp
4. Set the appropriate pressure according to
the label on the driver's side door or the
vehicle's user manual.
5. Once the desired pressure has been set,
flip the high volume/high pressure switch
to the high pressure setting (right) to initiate
inflation (Fig. 10). The indicator LEDs will
cycle on from left to right to indicate inflation
progress.
NOTE: Once the specified pressure setting
has been reached, the indicator LEDs will
light up solid and the motor will shut off
automatically.
High pressure
Fig. 10
High volume/high pressure switch
6. Return the high volume/high pressure switch
back to the off (middle) position before using
it again.
High Pressure Air Hose Adapters
The high pressure air hose can also be used
with the provided adapters to inflate a variety of
items. To use the adapters, lift up the air chuck
clamp and insert your adapter of choice into the
air chuck. Then press down on the air chuck
clamp to secure the adapter in place (Fig. 11).
Air chuck
Valve stem
(Schrader)
7
Fig. 11
Air chuck
clamp
Presta Valve Adapter
Presta valves are commonly used on road
bikes and some mountain bikes. To inflate a
bicycle tire, you will need to use the presta valve
adapter.
1. Loosen the Presta valve locking nut on your
bike's valve stem (Fig. 12).
To tighten
Presta
valve
stem
2. Thread the female end of the Presta valve
adapter onto valve stem of the bicycle tire.
3. Clamp the end of the air chuck down onto
the Presta valve adapter by pressing the air
chuck clamp down until it locks into place
(Fig. 13).
Fig. 13
Air chuck clamp
Presta valve
adapter
Presta valve
Tapered nozzle
Sports ball
needle
Presta valve adapter
Locking nut
To loosen
Fig. 12