SNOWJOE AUTOJOE ATJ-CTSO-BLK Manual Del Usuario página 4

2. Fold out the storage organizer and insert
the folded base plate into the bottom of the
organizer (Fig. 3).
Fig. 3
Folded base plate
Full Size
1. Unbuckle the remaining pair of toggle
fasteners (Fig. 2) and fold out the storage
organizer all the way.
2. Insert the unfolded base plate into the
bottom of the organizer (Fig. 4).
Fig. 4
Unfolded base plate
3. In its full size the storage organizer has two
dividers; a fixed divider in the middle, and
a smaller divider flap in the front half of the
storage organizer. To use the divider flap,
press the two snap fasteners on the divider
flap to the corresponding pair on the fixed
divider (Fig. 5).
Fig. 5
Fixed
divider
Using the Adjustable Straps
1. Take the two provided adjustable straps out
from the fabric pocket on the front of the
storage organizer.
2. There are two D-Ring anchors, one on the
front and one on the back of the storage
organizer. Using the adjustable straps, clip
the plastic snap hooks on both D-Ring
anchors (Fig. 6).
Fig. 6
D-Ring anchor
Plastic
snap hook
4
Divider
flap
"click"