Eurosystems ABR66 Manual De Uso página 14

1. GENERAL INFORMATION
1.1 INTRODUCTION
We thank you for your confidence in our
products and wish you an enjoyable use
of the machine and/or the interchangea-
ble equipment.
We have created these operating instruc-
tions to ensure trouble-free operation.
Carefully follow these recommendations
for the satisfaction of owning a long-term
properly functioning machine or inter-
changeable equipment.
Our machines and interchangeable equip-
ment are tested very rigorously before be-
ing mass-produced and are subjected to
strict controls during actual manufactur-
ing. This is the best guarantee of quality
for us and for the user.
This machine and/or interchangeable
equipment has been subjected to strict
neutral tests in the country of origin and
meets the safety standards in force.
1.2 THE MANUAL
The manual is divided into chapters and
paragraphs in order to present the infor-
mation as clearly as possible.
The instructions, drawings and documen-
tation contained in this manual are of a
confidential technical nature, strictly the
property of the manufacturer (see EC
declaration on last page) and may not be
wholly or partially reproduced in any way.
The user's manual must be stored with care
and must accompany the machine and/or the
interchangeable equipment in all the changes
of ownership that it may have through its life.
To facilitate this, the manual must be han-
dled with care, with clean hands and must
not be deposited on dirty surfaces.
It must be stored in an environment protected
from moisture and heat and in such a way that
it is always on hand to clarify any doubts. No
parts should be removed, modified or torn.
1.3 MANUAL SYMBOLS
DANGER!
This symbol highlights situations that
can affect safety, cause death and/or
serious injury to the operator.
CAUTION!
This symbol highlights situations that
can cause minor injury to the operator
and/or damage to the machine.
INFORMATION!
This symbol highlights special indica-
tions for better clarity and ease of use.
The images are indicated by the specific
figures (e.g. 2. 1 2. 1 ).
1.4 MANUFACTURER DATA
See CE label.
For information and to order spare parts,
please contact your local dealer, quoting
the item number and production num-
ber, which can be found on the CE label
2.1 2.1
shown in .
1. Manufacturer identification
2. Model
3. Product identification code
4. Item serial number
5. Mass
6. Year / Month
7. Motor power
8. Type of product
2. SAFETY INSTRUCTIONS
DANGER!
Read and understand this use and main-
tenance manual and that of the multi-
function machine on which this equip-
ment is mounted in its entirety before
assembling and operating the machine
or the interchangeable equipment.
DANGER!
It is the responsibility of the employer
to transmit all the information contained
in this manual to the operator who will
use the machine or the interchangeable
equipment.
This machine and/or interchangeable
equipment complies with all European
standards in force during the period of
production. Improper use or maintenance
may nevertheless increase the risk of in-
jury.
In order to avoid dangers for the safety of
people and damage to the interchange-
able equipment, please read very care-
fully, understand and observe the rec-
ommendations contained in the manual
related to the machine associated with
this equipment.
Indications for the interchangeable
equipment:
1. Before installing, inspecting, repairing,
removing or replacing the interchangea-
ble equipment or some parts of it, stop
the engine, letting the machine cool
down (15-20 minutes), and make sure that
there are no moving parts, disconnect
the spark plug cap and fit the equipment
guard.
2. When handling the equipment for the
assembly, replacement or maintenance,
wear sturdy protective gloves. In gener-
al, avoid contact with the equipment tools
and do not put your hands and feet near
the moving tools to avoid amputations and
injuries.
3. Do not use the machine associated with
this equipment if the latter is not correctly
installed or if it does not operate properly.
4. Install the protection on the equipment
if the machine is not used.
5. Disengage the equipment by releasing
the lever when work is not performed or
if dangerous conditions such as the ap-
proach of strangers to the danger area,
any malfunctions, reduced visibility or
sudden impact against an obstacle are
felt.
6. Disengage the equipment if you cross
gravel drives or roads.
7. Disengage the equipment and turn off
the machine if you notice abnormal vibra-
tions.
8. Only original spare parts must be used
to ensure the machine level of safety.
Instructions for adjustment and mainte-
nance:
DANGER!
All ADJUSTMENT and MAINTENANCE
operations must be carried out with the
motor switched off. Remove the spark
plug cap or ignition key (if present) to
avoid unexpected start-up.
CAUTION!
Check and ensure the stability of the
machine before carrying out ADJUST-
MENT or MAINTENANCE operations.
Keep all nuts, bolts and screws tightened
to ensure safe machine operation.
Only use original Eurosystems spare
parts. The owner loses all warranty rights
when using non-original spare parts.
Do not make any structural changes or
adaptations. Such changes will invalidate
the warranty and the manufacturer's lia-
bility.