Care and cleaning
OF YOUR WARMING PRODUCT
Before washing or storing your warming product:
IF YOU DO NOT FOLLOW THIS SEQUENCE THE WARMING PRODUCT WILL NOT WORK.
1 Disconnect power cord from wall before detaching control from warming
product.
2 Disconnect the power cord from the module.
3 Carefully follow all washing instructions of your warming product to avoid
shrinkage or possible damage.
DO NOT
• DO NOT dry clean your warming pillow top mattress pad. Dry cleaning solvents
may damage the warming element.
• DO NOT use bleach or cleaning fluids.
• DO NOT use a wringer.
• DO NOT iron the warming pillow top mattress pad.
• DO NOT use mothballs or sprays of any kind.
• DO NOT turn the warming pillow top mattress pad on until it is completely dry.
Taking care of your warming product is easy and safe as long as you follow a few
simple steps.
Machine Washing
1 Presoak the warming pillow top mattress pad for 15 minutes in mild soap
and lukewarm water.
2 Wash in mild soap and lukewarm water on the delicate or gentle cycle in the
washer for two minutes. Remember, do not use bleach.
10
All manuals and user guides at all-guides.com
3 Rinse in fresh, lukewarm water.
4 Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution: Do not use commercial dryers or the dryers at your local laundromat. They get
too hot and would damage the wiring of the warming product.
1 Preheat the dryer on the low temperature setting for 2 minutes.
2 Place warming pillow top mattress pad into the dryer and tumble dry for 10 minutes
3 Remove the warming pillow top mattress pad while it is still damp and gently stretch
4 Continue to air dry over a clothesline or a shower rod. DO NOT use clothespins.
5 Warming product must be completely dry before using.
Hand Washing
1 Presoak the warming pillow top mattress pad for 15 minutes in mild soap and
2 Gently squeeze the soap suds through a few times.
3 Rinse in fresh, lukewarm water.
Air Drying
1 Gently stretch the warming pillow top mattress pad back to its original size.
2 Air dry over a clothesline or hang over a shower rod. DO NOT use clothespins.
3 Warming product must be completely dry before using.
at a low temperature.
it to its original size.
lukewarm water.