Young America BTG 2000 Instrucciones De Ensamblaje página 5

NOTE: Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR
FUTURE REFERENCE.
Attached to the mattress platform is a sleeve to store the instruction booklet.
After assembly is complete, return this instruction booklet to the sleeve for future
reference.
This crib conforms to the ASTM International and the CPSC-Consumer Product Safety
Commission guidelines for product safety. Please adhere to the guidelines in this book-
let for assembly, use and maintenance.
Note the recommendations below:
Power tools are not recommended for assembly.

Give yourself plenty of room to work.

Due to the size of this bed, it must be assembled in the space it will occupy.

The assembly will take two people to complete.

Layout all the hardware and make sure that the proper length bolts are used in the

designated areas.
Do not substitute hardware. If an item is missing or damaged contact Stanley

Furniture Company immediately for replacement. Inspect all component parts and
hardware prior to beginning the assembly process.
Make sure all fasteners are tight.

Above all, take your time and read the instructions carefully.

Tools required for Assembly:
Allen Wrenches (provided)

This Crib is equipped with these additional features:
Bolt Retainer Sleeve—The Retainer Sleeves are located where Connector Bolts are used
to assemble the crib. It is designed to prevent loss of the Connector Bolts after crib is
disassembled. The Bolt Retainer Sleeves are permanently installed at the factory.
All manuals and user guides at all-guides.com
Crib Assembly
5