Oster BVSTMF1000 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Your milk frother has two functions as follows:
a. Frothing – Make sure the whisk is fitted in its place at frothing whisk clip as indicated (see
figure 2).
b. Stirring – Remove the whisk from the frothing whisk clip as indicated (see figure 3).
5. Insert the frothing/stirring axel into unit.
6. To close the lid, align the arrows starting from the right side and then turn lid clockwise until it is
closed.
7. Plug the electric cord into an electric outlet. Push the on button
milk and will switch off automatically when done. NOTE: Ensure the lid is firmly closed.
8. Carefully turn lid to open it and carefully remove the frothing/stirring axel from inside the unit.
9. Carefully lift the milk frother from the power base and pour the hot milk or frothed milk onto
your beverage.
10. The milk frother will not work again until the on switch is again switched ON. Wait 30 seconds,
allowing milk frother to cool down, and then switch ON.
All manuals and user guides at all-guides.com
Figure 2
Figure 3
English 5
. The unit will froth or stir

Publicidad

Tabla de contenido
loading

Tabla de contenido