RCA ANT122E Guia De Inicio Rapido

Indoor Antenna
Quick
Start Guide
Assembling your antenna
Some antenna models require assembly. If
your package comes with several separate
pieces—two long poles and a base—screw
the dipoles into the base to assemble the
antenna.
Use the RCA Signal Finder App
1
to find the best location for your
antenna.
In the Google Play or Apple App
Stores, search for "RCA Signal
Finder" and look for the icon
shown here. Then download and
install the App.
Launch the App and follow the
directions there to find the best
location and orientation for your
antenna.
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
2
Connect the antenna to your TV.
Note: If your TV's antenna
input is already connected to
a satellite receiver, cable box,
or digital converter, connect
the antenna's coaxial cable to
the antenna input jack on that
device.
STOP!
LIMITED LIFETIME WARRANTY
Voxx Accessories Corporation (the "Company") warrants to you the original retail purchaser of this product that should it, under normal
use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired
or replaced (at the Company's option) without charge for parts and repair labor. Call 1-800-645-4994 for location where product to be
sent transportation prepaid. ALL IMPLIED WARRANTIES ARE DISCLAIMED. Warranty excludes damage due to abuse and incidental or
consequential damage. These limitations may not apply where law limits length of implied warranty or exclusion of such damage. You may
also have additional rights.
©2019 Voxx Accessories Corp.
All manuals and user guides at all-guides.com
www.RCAAntennaHelp.com
3
If your antenna has a selector knob...
You can use it to fine tune your reception. Once
you've found the best positions for the dipoles and
UHF loop, find the selector position that gives you
the best picture.
4
Want to make this antenna even better?
Add an RCA Digital Amplifier to any passive antenna
to amplify your signal. The RCA Digital Amplifier is
available at retailers or at RCAAntennas.net
DO NOT RETURN this product to the store! Visit
RCAAntennaHelp.com for instructional and how-to videos.
Check out setup videos at
Adjust your antenna for best
reception.
> Turn on your TV.
> Adjust the antenna's
UHF loop.
> Extend the antenna's
dipoles (rods) and
rotate them.
Note: Different
channels may require different antenna
adjustments.
Scan for channels on your TV.
Most TVs have a channel scan option in their
menu system, many times in a SETUP or
CHANNEL menu under ANTENNA.
For detailed instructions on performing a
channel scan, see the owner's manual that
came with your TV.
Important: You must perform a channel scan
to receive any channels!
Dipoles
Loop
Traditional Insert BW 02