Aeezo Frame Initial Setup - AEEZO Portrait 01 Manual Del Usuario

En

AEEZO Frame Initial Setup

1. Plug in the power adapter included in the box to turn on the
frame.
2. You may need to wait for up to 15 seconds as the Frameo
system is loading.
3. Follow the prompts to set up the frame. You can use the
touchscreen to navigate through the setup menus.
1) First start by selecting a language. This will be used as
the system language and in all menus.
2) Connect your frame to the internet by selecting a Wi-Fi
network and entering the password.
3) If a newer version of the Frameo software is available,
then you will be prompted with an update dialog. It is
recommended that you update your frame immediately if
prompted.
4) Enter your name and the location where you will place
the frame (e.g. "John Smith" and "Living room," "Kitchen,"
or "Office.") Finally set the time zone if not correct.
1. Select a language
2. Connect to Wi-Fi
4