Philips HR2870 Manual Del Usuario página 15

Problem Cause
The The appliance is
appliance equipped with a built-
does not in safety lock. If the
work blender beaker,
chopper beaker or
smoothie beaker is not
assembled properly on
the motor unit, the
appliance does not
work.
The appliance is
equipped with a
thermal cut-out. If the
appliance overheats, it
automatically cuts off
the power supply.
The blade There is too much
unit is food in the appliance.
blocked.
The motor This is normal.
unit gives off
an
unpleasant
smell during
the first few
times of use.
The The blender beaker lid
appliance and/or the stopper
makes a lot have not been
of noise. properly placed.
All manuals and user guides at all-guides.com
EnglisH
Solution
Check whether the blender
beaker, chopper beaker or
smoothie beaker is assembled
properly on the motor
unit (see chapter 'Using the
appliance').
Unplug the appliance and let it
cool down for 30 minutes.
Then put the plug back into
the wall socket and switch
on the appliance again.
Switch off the appliance and
process a smaller quantity.
If the appliance continues to
give off this smell after you
have used it a few times, check
whether the quantity you are
processing and the processing
time are correct.
Make sure the lid and the
stopper are properly placed
and the sieve in the lid is in
front of the spout of the
blender beaker.
15