qeedo Quick Up Instrucciones De Manejo página 2

Instruction Sheet Qeedo Quick Up System
Assembly
1. 2.
• Put tent on the oor Lift up the centre of the cross structure
• Extend the poles completely
6. Possible mounting options
A Anchor over the vehicle with straps
7.
• Pull the tent away from the vehicle until the channel is tight
• Tension the channel with pegs
Disassembly
1. 2.
• Removing the tent from the vehicle
• Remove all pegs
• Remove canopy poles
All manuals and user guides at all-guides.com
3.
a)
a)
b)
a) Pull out all upper telescopic rods until the locking pin locks into position
b) Pull out all lower telescopic rods until the locking pin locks into position
B Attach to the rail with webbing
8.
• Pull the corners of the tent outwards
• Peg down in a crosswise manner
b)
a)
Press the plastic lever to a) Retract all lower telescopic rods
unlock the securing pin b) Retract all upper telescopic rods
CLICKCONCEPTS GmbH, Ferdinand-Porsche-Straße 4, 73479 Ellwangen - DE, tel.: +49 (7961) 969 869 - 750, fax: +49 (7961) 969 869 - 799, web: www.qeedo.de
4.
b)
• Attach the canopy rods
• Suspend the canopy
C Insert weather-strip into the keder-strip
9.
1. 3.
4. 2.
•
•
•
3.
b)
a)
• Push the cross structure downwards
• Fold the poles towards the centre
5.
Push the tent up to the vehicle and choose one of
the following connection options:
D Guide the rod through the hemstitch and clamp in position
(rod not included)
Place the retainer of the guy rope around the pole structure
Guide the guy rope through the slit and peg down
Adjust the guy ropes as needed to tension them
4.
Furl the tent
EN
Go to www.qeedo.de for
instructional videos on how to
assemble and disassemble the
tent. Or just scan the QR code
with your smartphone.