Power Probe IRGUN500 Manual Del Usuario página 2

IRGUN500
Description
Noncontact Themometer detects the infrared ray that
an object emits, The instrument foculizes infrared
energy of the object onto a sensor through a lens,
changes the surface temperature into electric signal,
a microcomputer calculates and displays the
measurement temperature on the LCD.
• Single-spot Laser Sighting
• Backlit Display
• Current Temperature Plus MIN, MAX, AVG Temperature Displays
• Preset Emissivity 0.95
Warning
• Please read the following information carefully before using the meter.Protection
is impaired if used in a manner not specified in this manual
• Do not clear the meter using solvents.
• Keep the instrument clean, and do not get dust into detecting hole.
• Do not point laser directly at eye or indirectly off reflective surfaces.
• Laser :class 2 <1mW/630-670nm
• Laser radiation is classified according to IEC 60825-1: 2014-05, Safety of laser
products –
Part 1: Equipment classification and requirements.
LASER RADIATION-DO NOT STARE INTO BEAM.
AVOID EXPOSURE-LASER RADIATION IS EMTTED FROM THIS APERTURE
MAX OUTPUT <1mW
WARNING
Panel
2
3
,
WAVELENGTH 630~670nm
Laser radiation-
when open do not
stare into beam.
6
7
5
8
4
9
CAUTION
01
,
CLASS 2 LASER PRODUCT
laser
1 Screen
2 Mode key
3 Backlight key
4 Laser key
5 °C/°F key
6 Sensor
7 Laser
8 Trigger
9 Battery cover
EN