sauermann KT220 Guía Rápida página 2

Quick start guide
English
Reference
KT 220 Temperature, humidity, current, voltage, electrical pulses, liquid pressure
Temperature, humidity
KH 220
current, voltage, electrical pulses, liquid pressure, light
KTT 220
Operating temperature, protection of the instruments and information about storage and the battery
• Operating temperature*: KT220: from -40 to +70 °C; KH220, KTT220: from -20 to +70 °C
• KT220: IP65; KH220: IP20; KTT220: IP54*
•
Storage temperature: from -40 to +85 °C
Battery power supply: 1x AA lithium 3.6 V battery
1 Display
°C: Temperature in °Celsius.
°F: Temperature in °Fahrenheit
%HR: Relative humidity (KH 220)
2 Dimensions (mm)
KT220, KH220
*With all the thermocouple probes connected.
Parameters
(internal sensor, an additional external humidity probe is available as an option),
Temperature
KT / KH 220
END DATASET is finished.
REC Indicates that one value is being recorded. KT / KH 220
It flashes: the DATASET did not start already.
FULL Flashing slowly: DATASET is between 80 and 90 % of the storage capacity.
Flashing quickly: DATASET is between 90 and 100 % of the storage capacity.
Constant: storage capacity full.
BAT Constant: indicates that the batteries have to be replaced.
1 2
Indicates the channel number which is measuring.
3 4
ACT Screen actualisation of measured values.
MIN The displayed values are the maximum/minimum values recorded for the channels
MAX displayed.
Indication of the direction of exceeding the threshold in the recorded meas-
urement
KT / KH 220
KTT220
KT / KH 220
3 Connections
Connecteur micro-USB
Entrée pour sonde universelle
KTT 220
KT / KH 220
Micro-USB connector
Input for universal probe
KTT 220
KT / KH 220
5 Recorder fuction
Five recording modes
KISTOCK can record in 5 different ways:
Conector micro-USB
• "Immediate" mode records values according to a predefined interval.
• "Minimum", "Maximum" and "Average" record automatically the calculation of minimum, maxi-
mum or average of measured values during an interval of recording.
Entrada universal
"Monitoring" mode allows to get an accurate history report during error events to help trouble-
KTT 220
shooting, without stopping the measurement logging. To proceed this way, you just have to define :
- a record interval to be used whilst the readings are beyond the setpoints
- a record interval for the values measured during each reading beyond the setpoints
• Furthermore, you can also let your KISTOCK record non-stop ("loop" recording option).
Four types of dataset start:
Once your recording mode has been set, you can launch your dataset:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
• With "Online" option. In this case, your datasets are directly sent, saved and displayed on your PC in
real time.
Six types of dataset stop
You can stop your dataset:
• According to a date and time (if it was started the same way)
• According to a period
• According to a predefined number of recording points
• Once the storage capacity is full
• With "Stop" option of the software
• By holding "OK" key during 5 seconds, if this function has been previously activated by the software
Entrée pour sonde universelle
KTT 220
Connecteur micro-USB
Micro-USB connector
Input for universal probe
2 entrées thermocouples
KTT 220
Micro-USB connector
Conector micro-USB
2 thermocouple inputs
Entrada universal
KTT 220
Conector micro-USB
Entradas para termopar (2)
2 entrées thermocouples
Micro-USB connector
2 thermocouple inputs
Conector micro-USB
Entradas para termopar (2)