Becken BECM2493 Manual De Instrucciones página 14

During the operation, if the coffee and steam indicator lights up at
the same time, you cannot make coffee, if you want to make coffee,
repeat the steps above.
PRODUCING STEAM TO HEAT LIQUIDS
The steam wand (without the frothing device) can be used to make
hot beverages like drinking chocolate, and water. Method:
• Remove the detachable tank and fill it with the desired water, the
water level should not exceed the "MAX" mark in the tank. Then
place the tank into the appliance properly.
• Then connect the appliance to the power supply source.
• Press the ON/OFF switch, the power indicator (red) is illuminated.
• Turn the knob to the "
is on the higher position which is the "
will pump water, when there is water flowing out, close the pump
immediately, pressing the steam button down to the lower position
which is the "
appliance begins to be heated until the steam indicator is illuminated,
indicating that the heating is finish.
• Remove the frothing device from the steam wand.
• Dip the steam wand into the liquid to be heated. Turn the knob to
the "
• When the required temperature is reached, you can turn the knob to
the "
• Press the power switch to cut off the power source.
AUTOMATICALLY POWER-OFF FUNCTION
• After pressing the power switch, if there is no operation within
25 minutes, the unit will power off automatically.
14
AF Manual Instruç o ̃ e s Má q uina de café A5 EN 3mm.indd 14
" position, make sure the steam button
" position and waiting for a moment, as the
" position.
" position.
" position, the pump
02/09/16 10:58