Product Setup - Eagle Arion ET-AR516R-BK Manual Del Usuario

4. Product Setup

Speaker
1. Connect your music device to Audio Input
2. Connect the satellites to Audio Output.
3. Connect the power cord to 120V AC
outlet.
4. Turn on the power switch.
5. Slowly increase volume until reaching a
comfortable level. Adjust treble or bass as
needed.
Remote control
1. Remove the plastic tab from the battery
compartment.
2. Point the remote control to the
subwoofer's front panel.
3. Press one button at a time to make
adjustments.
All manuals and user guides at all-guides.com
INPUT OUTPUT
L L
R R
1 2 4 3
INPUT OUTPUT
L L
R R
5. Optimum Settings
1. For best reception, always point the remote
control at the subwoofer. The remote control's
effective range is approximately 10 feet.
2. For best tonal fidelity, we recommend setting
your audio source to line level output and use
the speaker to control overall volume level.
3. This speaker system is most efficient when
the volume level is set between 30% to 80%.
You get highest sound quality and minimum
distortion within these volume levels.
6. Specification
• Total RMS Power: 50 Watts
- Satellites: 10 Watts RMS x 2 (into 4 ohms,
@<=1% THD)
- Subwoofer: 30 Watts RMS x 1 (into 4 ohms,
@<=1% THD)
• Total Peak Power: 100 Watts
• Frequency Response: 40Hz to 18kHz
4. Place the satellite speakers at least 16 inches
from each other. This enhances stereo sound
effect and perceived sound field.
5. Provide ample space around the subwoofer
unit. It needs enough room to move massive
amount of air! To further enhance lower
frequencies, place the subwoofer unit near
walls.
• Drivers:
- Satellites: 3-inch midrange and 1-inch
tweeter with wooden enclosure
- Subwoofer: Dual 5-inch driver with wooden
enclosure
• Speaker Dimension:
- Satellites: 4.1 x 4.1 x 7.5 inches
- Subwoofer: 13.9 x 10.7 x 7.5 inches