Publicidad
Connecting receivers to the EW-D ASA
You can connect and operate up to four EW-D EM rack receivers with the EW-D ASA.
To connect the receivers to the EW-D ASA antenna splitter:
Connect one of the receiver's antenna inputs to one of the BNC sockets A1 to A4 using one of the supplied BNC cables.
The receivers do not require a separate power supply. They are powered via the BNC sockets A1 to A4.
Connect the receiver's other antenna input to one of the BNC sockets B1 to B4 using one of the supplied BNC cables.
Publicidad
