How To Use; Turning On/Off - Xiaomi Mi 2 Manual Del Usuario

Installation
Step 5: Install the front grille
Align the front grille alignment mark with the rear grille le alignment
mark, and make sure the 11 front grille is properly embedded into the
13 rear grille. Turn the front grille clockwise until the front grille
alignment mark aligns the rear grille right alignment mark. Make sure
the grilles are securely fastened.
Rear Grille Le
Alignment Mark
Front Grille
Alignment Mark
Top View before
Fastening the
Front & Rear Grille
11 13
Step 6: Fasten the front grille
Insert 8 fan grille screw into the hole at the
bo om of the fan grille. Turn the screw clockwise
by using the included hex key to tighten it.
7
Rear Grille Right
Alignment Mark
Front Grille Alignment Mark
Top View a er Fastening the Front & Rear Grille
8
7

How to Use

Connecting to an electrical outlet
Connect the power cord to the power port on the base and then
plug it into an electrical outlet. When you hear a beep, the fan is
successfully connected to the power supply.
Turning On/Off
Turning On
Press the bu on to start the fan. When turned on for the first time,
the default speed is slow (1) and the mode is direct breeze.
Turning Off
Press the bu on to stop the fan while it is running.
Switching Speed/Mode
Switching Speed
Press the bu on to adjust the speed, and the corresponding
indicators will light up (see table below). A er the fan is turned off
and turned back on again, the speed will be the last used one.
Speed Slow (1) Medium (2)
Indicator
Note: means the indicator is on;
6
Fast (3) Turbo (4)
means the indicator is off.