Uline H-7809 Manual Del Usuario página 3

ALIGN TOP HANGERS FOR MOUNTING
6. While holding board flush to wall, mark a pencil
line along back edge of frame near top corners of
board (G). Then remove board from wall.
(See Figure 3)
7. Align line indicator of top hangers with marked line
three inches from side edge of board. Mark precise
screw hole location at bottom of slot by arrows (H).
Drill 1/4" hole in wall in the marked location for each
top hanger (I). (See Figure 3)
8. Tap in dry wall anchors. Drive No. 10 screw through
slotted hole of hanger into wall anchor (J). Tighten
screw. (See Figure 3)
Figure 3
H
1. Insert flat tab of page clip under frame (M). Clips
can be placed anywhere along frame edge to hold
notes or documents. (See Figure 5)
PAGE 3 OF 9
MOUNTING CONTINUED
I J
PAGE CLIP INSTALLATION (OPTIONAL)
1-800-295-5510
SECURE BOARD TO WALL
9. Place board onto bottom hangers and press flush to
wall (K). Do not let go of board. (See Figure 4)
10. Lightly tap each top hanger into place (L). Top
hangers must be securely engaged to lock board
into place. (See Figure 4)
Figure 4
K
L
Figure 5
uline.com
M
0521 IH-7809