Thompson Comby Serie Manual Del Usuario página 51

handsets can be associated with this base. This base is compatible with Thomson's
handset and other GAP-compatible handsets.
Handset batteries must be fully charged and you must be closed to the base to
register.
Handset that supplied inside this package is already registered.
1. At the base: Press MENU key, scroll ▲/▼key to select REGISTRATION. Press
MENU key. The display shows SEARCHING.
2. At the handset: Press
key.
3. Scroll ∧ or ∨ key to select base number. The base with a "+" to the right side of
the base number on the display is already in use.
4. Press key, the display shows PIN?. Enter the 4 digit PIN code (default 0000)
for the base.
5. Press key to confirm, and the display shows SEARCHING 1(or 2,3,4)
6. After few seconds, the handset will sound DI-DU- DU. The handset and base will
register successfully.
It will automatically assign a number which is displayed on the handset and
must be used for internal calls.
If the PIN code is incorrect, the handset returns to standby after 2 minutes. Try
registering again.
USING THE ANSWERING MACHINE (TAM)
This product can digitally record up to 60 minutes of message. As well as recording
incoming messages, you can record memos for other users.
You can operate your answering machine from the handset, or remotely from other
telephones.
You will need to set the correct date and time (if you have not already done so) so
that you will know when each message was received. If you subscribe to Caller
display service, the date and time would be set on the phone automatically. If you
need to set it manually, please reset it under SETTINGS.
Switch the answering machine on/off
1. Press MENU key, scroll ▲/▼key to select TAM.
2. Press MENU key, scroll ▲/▼key to select TAM SETTINGS.
3. Press MENU key, the display shows TAM ON/OFF.
4. Press MENU key, the display shows ON. Press MENU key to confirm.
Remark: You can press and hold
machine ON or OFF. When answering machine is off, the display shows TAM OFF.
key, scroll ∧ or ∨ key to select REGISTRATION. Press
key for 2 seconds to switch the answering
50