Husqvarna 28508915044 Instrucciones De Montaje página 13

All manuals and user guides at all-guides.com
- Position license plate holder support
- Thread turn signal wiring harness
- Thread license plate lighting cable
NOTE
The help of an assistant is useful in this step.
- Plug license plate lighting cable
- Route wiring harness
cable ties if necessary.
- Join plug-in connector
- Secure the bottom cables with cable ties.
Route all the cables free of tension and ensure that the
cables cannot be kinked or pinched!
- Position side right side fairing.
- Mount screw
- Mount screw
- Mount screws
- Mount license plate holder support
(all included) and tighten to 25 Nm (Loctite 243).
NOTE
If used with the passenger seat handle, only use the screws
(included).
.
upwards.
from left to right.
into turn signal wiring harness
free of tension forwards and secure with
.
and tighten to 4 Nm.
and tighten to 4 Nm.
and tighten to 4 Nm.
with screws
.
and bushings
13