SHERCO EVEREST XY-TY-50cc Instrucciones De Uso página 4

ENGLISH
« MODE »
BUTTON
WAKE UP
- Motorbike power supply is activated: the
dashboard does the normal start-up and stays
ON.
- Wheel revolution: the dashboard will display
the normal mode and will be ON during 30
seconds if no speed pulse is generated.
- If one or both buttons are pushed: the
dashboard will display the normal mode and will
be ON during 30 seconds if no pushbutton is
pressed.
SPEED
The speed and speed units are permanently
displayed in km/h or mph with a range of 0 to
199 in both cases.
DISPLAYS
Scrolling between displays :
Press SET < 2 seconds to show ride time or km.
Press SET >10 seconds to change units km/h –
mph.
Press MODE < 2 seconds to show the total - trip
A - trip B - total.
Press MODE & SET > 2 seconds to enter in
clock mode.
Press MODE > 10 seconds to enter in the wheel
length mode.
3
CLOCK
Format :
if units are km
if units are mi
Press MODE < 2 seconds to increase the hour
digits.
Press MODE > 2 seconds and speedy will
increase the hour digits.
Press SET < 2 seconds to increase the minutes
digits.
Press SET > 2 seconds and speedy increase the
minutes digits.
Press MODE & SET > 2 seconds to exit clock
mode and save the value.
NO ACTION > 10 seconds will auto exit without
saving.
TRIP A & TRIP B
Press MODE < 2 seconds to display in the
dashboard.
Press SET < 2 seconds to show ride time or km.
Press SET > 2 seconds to reset.
WHEEL LENGTH CONFIGURATION
Press MODE < 2 seconds to change wheel
(50SM = 1850 / 50EN = 2070 / XY-TY = 2190).
Press MODE & SET > 2 seconds to exit wheel
length mode and save the value.
NO ACTION > 10 seconds will auto exit without
saving.
XY-TY-50cc
« SET »
BUTTON
→
24 h
→
12 h