Descargar Imprimir esta página

Williams-Sonoma TILDEN Instrucciones De Ensamblaje página 2

Publicidad

Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
10-JAN-2021
PARTS INCLUDED:
˚
˚
˚
˚
˚
PIÈCES COMPRISES:
˚
˚
˚
˚
˚
PIEZAS INCLUIDAS:
˚
˚
˚
˚
˚
TOOLS REQUIRED: Phillips and slotted screwdriver, Pencil, Tape measure.
OUTILS REQUIS:
Tournevis cruciforme et plat, crayon, ruban à mesurer.
HERRAMIENTAS REQUERIDAS:
INSTALLATION INSTRUCTIONS
Note: Your Tilden Door knocker is crafted of forged solid brass. Forging is a process whereby a tool forms and actually compresses
the metal with a tremendous amount of force. Each piece is then polished by hand.
Place one of the Wall Plate in desired location on the Door.
1.
After positioning on the door, lightly mark hole mark of M.S wall plate.
2.
Wall Plate Mounting as shown, in outline post.
3.
Mark Location of mounting screw installation. Remove mounting wall plate from door.
4.
Place wall plate over door and insert mounting screw. Place tilden door knocker over the wall plate and tighten Allen screw.
5.
If necessary, loosen wall mounting screws and adjustable tilden door knocker to obtain proper alignment on door. Retighten
6.
allen screw and remount wall plate.
Williams-Sonoma Inc.
1 pc
Tiden Door knocker
1 pc
Allen Screw M4x12mm
1 pcs
Allen Key M4
1 pcs
M.S. Wall Plate
2 pcs
Mounting Screws (S.S Ø 8.0 x 35.0 mm)/(S.S Ø 0.314 x 1.377Inch)
1 pc
Heurtoir de porte Tiden
1 pcs
Vis Allen M4x12mm
1 pcs
Clé Allen M4
1 pcs
MME. Plaque murale
2 pcs
Vis de montage (S.S Ø 8,0 x 35,0 mm) / (S.S Ø 0,314 x 1.377pouce)
1 pc
Aldaba de puerta Tiden
1 pcs
Tornillo Allen M4x12mm
1 pcs
Llave Allen M4
1 pcs
SRA. Placa de pared
2 pcs
Tornillos de montaje (SS Ø 8.0 x 35.0 mm) / (SS Ø 0.314 x 1.377pulgadas)
Destornillador Phillips y ranurado, lápiz, cinta métrica.
Assembly Instructions
Instructions d'assemblage
Instrucciones de Ensamblaje
2/3
UK – A – NS

Publicidad

loading