Asus RP-AX56 Guia De Inicio Rapido página 7

TROUBLE SHOOTING
If your AiMesh router cannot find RP-AX56 nearby
or synchronization fails, please check followings and
try again.
a
Plug RP-AX56 into a power outlet near your router/
AP. Ensure that it is within 3 meters from the
AiMesh router.
b
Your AiMesh router is upgraded to AiMesh-
supported firmware.
i. Download AiMesh - supported fireware at:
https://www.asus.com/AiMesh/.
ii. Launch a web GUI. You will be redirected to
the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
iii. Go to Administration > Firmware Upgrade.
Click
supported firmware.
iv. After the firmware is uploaded, please go to
the Network Map page to check and make
sure that the AiMesh icon shows up.
Choose File, and upload the AiMesh-
7