Change To The Edging Mode; Pivoting Head Function; Operation Tips; Cutting Tips - GreenWorks STG304 Manual Del Operador

9.7

CHANGE TO THE EDGING MODE

90°
You can change the trimmer to an edger to keep patios,
driveways and sidewalks well groomed.
1. Stop the machine.
2. Push on the edge button （7） and turn the trimmer head
90 degrees until the trimmer head locks into position.
3. Release the edge button.
9.8

PIVOTING HEAD FUNCTION

Adjust pivoting head to trim areas which are hard to reach
and for users to operate comfortably.
NOTE
NOTE
English
1. Stop the machine.
2. Push on the pivoting button （13） and turn the shaft
until the trimmer head locks into required position.
3. Release the pivoting button.
9.9

OPERATION TIPS

Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep a firm hold with the two hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Remove the battery pack.
• Remove the grass.
9.10

CUTTING TIPS

Danger area
• Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
9
WARNING
WARNING
Direction of
rotation
Best cutting area
EN