Fault diagnosis
Fault
No response when depressing
Check all cables are connected and wait
the up "▲" or down "▼" buttons.
for 18 minutes before trying again.
Ensure any load placed on the desk top is
Desk top is rising at a very low
not exceeding the 50Kg maximum load
speed.
specified in these instructions.
Desk top rises when the down
"▼" button is depressed or
Activate the "Reset" function.
lowers when the up "▲" button
is depressed.
Desk top loweres without
Ensure any load placed on the desk top is
depressing either the up "▲"
not exceeding the 50Kg maximum load
or down "▼" buttons.
specified in these instructions.
Ensure any load placed on the desk top is
not exceeding the 50Kg maximum load
Product automatically re-sets.
specified in these instructions.
Desk top fails to reach maximum
Activate the "Reset" function.
and minimum heights.
Corrective action
Attention
1. Power supply: AC 100V-240V,50/60Hz
2. Service Environment: 0-40°C
3. Unplug the power plug from the mains socket before cleaning. Wipe clean
with a soft damp cloth.
4. The electric box contains electronic components, metals, plastics,
wires etc., so dispose of it in accordance with each country's environmental
legislation, not the general household waste.
5. Check carefully to ensure correct and complete assembly before using. 6.
Be familiar with all functions and program settings of the product before
first use.
7. Not for use by children under the age of 14 years.
8. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or a similarly qualified person in order to avoid a hazard.
MADE.COM Design Limited. 5 Singer Street, London
EC2A 4BQ
Eurolink Europe Compliance Limited, 25 Herbert Place,
Dublin D02 AY86, Republic of Ireland
15