3. Connections
3.1 Audio and video output connections
Use 2.1-channel surround sound and enjoy your own home cinema. You can
connect the video between the DVD player and TV using composite video or
SCART terminal
3.2. A/V output connection SCART connector (Good quality)
You can connect the DVD to the TV with a SCART audoi and video output or EU-
ROCONNECTOR which allows you to enjoy both sound and picture at the same
time through the Euro-connector cable.
You should select the "RGB" option to setup the video output.
4. Playback types
4.1 DVD discs
The DVD will start running automatically after you insert it into the player by openning
the disk's home menu. From here, depending on the disk, you can select various op-
tions such as starting playback of the DVD film, audio language, etc.
During DVD playback.
(1) Press the "MENU" Key to access the DVD home menu.
(2) Uste the "TITLE" key to go to the DVD´s title menu (ig the disk in the tray has a
title menu).
(3) You can use the normal playback functions: PLAY, PAUSE, STOP, Frame by Frame,
playback (STEP), ZOOM, slow motion (SLOW), SKIP (>> and <<), repeat and A-B re-
peat.
(4) Use the NEXT keys to change chapters (to go to the next chapter) and PREV (to go
to the previous chapter).
(5) Use the TIME key to play a certain momento on the DVD or to access a certain
title and chapter.
Use the UP and DOWN keys to select "Time" to go to a certain moment in the DVD
and play it or select "Title/Chapter" to go to a certain chapter with that title.
Use the numeric keys to enter the time, title and chapter that you want to play and
then press "ENTER".
(6) Press the "LANGUAGE" key to select the audio language Dolby Digital AC3 and
DTS Digital System selection (if the disk was coded for these functions).
(7)Use the "ANGLE" key to choose from various camera angles on the DVD (if the disk
includes this option).
(8) Use the "SUBTITLE" key to activate/deactivate the subtitles (if the disk includes
this function).
(9)Use the "Vol +" and "Vol -" keys to control the audio volume.
4.2 MP3 and WMA files
Once you insert a CD in MP3 or WMA format, the system will start to play the
first title in the first directory.
(1) Use the cursor keys to select the song you want and press "ENTER" to start
playback.
5