KlipXtreme KMM-400 Instrucciones De Montaje página 3

5. Tighten the locking knob until the mount is securely attached to your desk surface, but be
careful not to overtighten it as you could damage the desk surface.
6. For a C-clamp installation from 40-78mm use the bottom screw hole on the C-clamp.
7. Proceed to fix the bottom plate of the C-clamp with the supplied screws based on the
mounting depth needed, as illustrated below.
8. Slide the clamp base onto the edge of your desktop in your desired location. Tighten the
locking knob until the mount is securely attached to your desk surface, but be careful not to
overtighten it as you could damage the desk surface.