5. Place Quick Switch™ PerfectMix™ assembly (A) over
holes (B) on frame (viewing from front of unit). Push
tree clips (C) into holes until they sit flat against Quick
Switch™ PerfectMix™ assembly.
6. Rotate hose wrap (D) clockwise towards "unlock" ( )
icon and pull off.
D
7. Snap one end of the high pressure hose into the clip on
the inside of the hose wrap and wrap hose up.
8. Align hose wrap to the front side of accessory tray with
the "lock" (
) and "unlock" ( ) icons at the bottom.
9. Rotate clockwise towards "unlock" ( ) icon until hose
wrap seats flat. Rotate counterclockwise towards "lock"
(
) icon to secure hose wrap to accessory tray.
NOTICE Hose wrap is easily removed from the accessory
tray for wrapping and unwrapping of the high pressure hose.
A clip to secure the hose on the reel makes it easy to wrap
the hose while it is detached from the accessory tray.
10. Insert supplied accessories in spaces provided in
accessory tray. See How to Use Accessory Tray.
Quick Switch™ PerfectMix™ System
The pressure washer is equipped a Quick Switch™
PerfectMix™ assembly that can hold two different
PerfectMix™ Extreme Concentrate bottles (not included). This
detergent siphoning system allows you to use concentrate
straight from the bottle. The Quick Switch™ allows you to
A
select which detergent you want to use.
Attach PerfectMix™ Detergent Hose
1. Attach end of blue PerfectMix™ detergent hose (E) to
B
barbed hose fitting (F) of pump.
C
2. Attach other end of blue PerfectMix™ detergent hose (E)
to hose fitting (G) on underside of Quick Switch™
PerfectMix™ assembly.
Attach PerfectMix™ Detergent Concentrate Bottles
1. Remove cap and screw PerfectMix™ Extreme
Concentrate bottle (H) onto right underside of Quick
Switch™ assembly. Repeat for second bottle on left side.
NOTICE Make sure clear detergent tube is inserted into
PerfectMix™ Extreme Concentrate bottle when screwing onto
Quick Switch™ assembly.
2. Turn Quick Switch™ (J) to select desired detergent.
8
F
E
G
E
H
J